OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

How to dull a shiny ejection port?

Started by cohuttariverrat, March 02, 2013, 04:50:23 PM

Previous topic - Next topic

cohuttariverrat

Some Mossbergs have extremely shiny bolts and elevator. So bad that the sun broadcast a mirror effect. Has anyone experienced how to black them out or camo? Also what is that metal? This is the last thing I lack in turning a Bantam 20ga into a dedicated turkey slayer

paladin

Competition shooters would "smoke" their sights to reduce glare. they used a torch that used alcohol and charcoal if I remember correctly.you could try it with a candlefrom a birthday cake.

"have gun-will travel"

noggin buster

rattle black,dura coat, Aluma hyde from brownells any of those will work. :OGturkeyhead:

allaboutshooting

Quote from: cohuttariverrat on March 02, 2013, 04:50:23 PM
Some Mossbergs have extremely shiny bolts and elevator. So bad that the sun broadcast a mirror effect. Has anyone experienced how to black them out or camo? Also what is that metal? This is the last thing I lack in turning a Bantam 20ga into a dedicated turkey slayer

There is a product called Slip Plate that is graphite based but dries hard and a flat black/gray. It has the added benefit of lubricating anything that it's sprayed on. It lasts a long time. I've used it on small internal gun parts for years.

One caution. It is nasty stuff. You'll want to use it outdoors and probably want to use gloves.

You can find it many times at farm supply stores in both aerosol cans and regular paint cans.

Thanks,
Clark
"If he's out of range, it just means he has another day and so do you."


cohuttariverrat

Thanks for the response. Should I rough the finish up with something before spraying or would it bond to that slick crome finish? I used a black sharpie and marked a little spot then let it dry a few days and it would rub off :firefighter:

allaboutshooting

Quote from: cohuttariverrat on March 02, 2013, 09:31:53 PM
Thanks for the response. Should I rough the finish up with something before spraying or would it bond to that slick crome finish? I used a black sharpie and marked a little spot then let it dry a few days and it would rub off :firefighter:
If you clean the surface, no roughing up is necessary. The Slip Plate will adhere very well and stay on for a long time. Just be sure to let it cure thoroughly.

Thanks,
Clark
"If he's out of range, it just means he has another day and so do you."