OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

bead not straight

Started by benellinut, April 27, 2013, 10:51:38 PM

Previous topic - Next topic

benellinut

went to put a truglo fat bead on supervinci  but it will not tighten up straight on barrel.any suggestions please

Old Gobbler

:wave:  OG .....DRAMA FREE .....

-Shannon

benellinut

yes threaded bead on a benelli

turkey buster

probably not what you are looking for answer wise but i have found that beads are off on your poi/poa on alot of guns for various reason and one being not lined up properly. you might consider getting an optic of some sort

Borden811

Put a lead shotgun pellet in the threaded hole. Then tighten the bead down on top of it until it is tight, and straight. The lead will squish, but still be a solid enough base to keep the sight tight.

jrmcclure

A very small pieces of plumbers thread seal tape. Depending on the amount of tape as to where the bead is tight and weather it is aligned properly. Mess with the amount of tape to get the proper alignment. I had the same problem with a mossberg waterfowl barrel problems been solved for two years now and still holding up. 

howl

Shorten the threaded portion with a file. Take a little off at a time until it sits straight when screwed all the way in. Don't forget the anti-seize.

Borden811

Anti-seize, or do you mean lock-tite?

runngun

Blue lock tite

Sent from my MB865 using Tapatalk 2

Blessed are the peacemakers for they are the children of God.

howl

I meant anti-seize to make sure you can get it back out later.