OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

barrel polishing

Started by tha bugman, February 27, 2012, 04:03:27 PM

Previous topic - Next topic

tha bugman

Should I expect a much higher pellet count with polishing?  How much should I expect to spend?

WildSpur

I did my winchester 1300 awhile back.  I was averaging 100 pellets.  After polishing I was averaging 130 with winchester hv #6.   I did not compare my 835 when doing this so I don't have any other comparison.

Sent from my ADR6350 using Tapatalk


Cluck more, yelp less

bowhunter32

its a pretty easy endeavor..well worth the time spent...money wise providing you have rods drill and brushes prolly 30 bucks or so..the jb's is bout 25 bucks shipped from brownells..hope this helps..good luck


swamppirate

Interesting, I may try mine.
Duty is the most sublime word in our language. Do your duty in all things. You cannot do more. You should never wish to do less.
Robert E. Lee

Sand Man

I just did 3 20ga barrels this week.  I didn't do a before pattern test and still need to take to the pattern boards this weekend, but you can tell a noticable difference in before and after just by looking down the barrel.  Worth it in my opinion.  2 of the 20ga barrels had distinct impressions whether it was from where they stamped the wording on the outside of the barrel or welded on the rib.  All of those imperfections came out of the inside of the barrel after polishing.


Let the little twenty EAT!!!!

otis

 :wave:i own a 12 gauge barrel polishing brush what kind should i get for the 20 gauge and who sales them

crenshawco

Look up at the Polishing your barrel stick at the top of this forum. All questions are answered in there

Sand Man

Quote from: otis on March 01, 2012, 03:54:22 PM
:wave:i own a 12 gauge barrel polishing brush what kind should i get for the 20 gauge and who sales them

Otis, I started out using the directions in the thread above.  Granted it was working, but not at the rate I wanted to get the deep indentions from the welds and letter stamping out.  My buddy had a 12ga polishing brush he had bought to use on his over/under.  He told me he was done with the brush and we should try it on the 20ga.  It worked like a champ.  Very stiff at first but after mulitple runs it compressed to the size of a 20ga.  Meaning it will never work in the 12ga again, but it works well for the 20ga.  It was MUCHO faster using the brush.  I had completed 2 of the barrels with the steps above.  I went back and re-did the two finished barrels.

The 12ga barrel brush just replaced the course polishing step or step 1 in the instructions above.  I did got back and polish with the finer compound using the scotch bright to finish the barrels.  They are really slick now.  Looking forward to patterning them.


Let the little twenty EAT!!!!

otis

 :you_rock: :happy0064: did not even see that






thanks   otis