OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Breaking in rifle barrel.

Started by Deputy 14, February 24, 2012, 11:08:24 AM

Previous topic - Next topic

Deputy 14

I bought a new rifle yesterday and I'm curious as to how everyone breaks their new barrels in. I've always shot 5 rounds, swabbed with Hoppes, dry patch, and allowed to cool. Repeat roughly 25 to 30 times. The rifle is a 700 SPS Varmint bull barrel in 22-250. Any input is appreciated.

wisconsinteacher

That would work.  Nosler has a way on their sight that is more work.  I have never done that, I just shoot them and clean them, but I don't put a lot down range at a time.  I think the biggest issue is to keep it cool, and use a bore guide when cleaning.  Also, clean from the bore to muzzle.  I have been using Sweet 7.62 and it really gets the copper and powder out.

dirt road ninja

A factory barrel is going to take a little more time to break in. The method you posted will work just fine. On factory tubes I'll more often then not shoot 3 to 5 rounds - clean - then shoot it as much as I want - clean. I'll do this for a couple trips to the range. The Sweet mentioned by Wisconsinteacher is good stuff, but be carefull not to let it sit to long. Hoppes # 9 can stay in for awhile. Before I leave the range I swab down the rifle with the #9 and leave it in till I get home.

30_06


Holston

I've tried to follow some of the more popular routines out there of shooting x number of rounds then cleaning, repeat, repeat, repeat.

Never could tell that it made a difference.

Now, I normally just shoot with some generally decent loads to form brass and see what kind of potential it has.  By the time I get all that done I've usually got over 100 rounds through the barrel.  I'll give it a good scrubbing then, removing all the copper, then call it quits and won't clean again until I start losing accuracy.