OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

What load for 870 super mag

Started by lmbunch69, January 01, 2020, 08:58:53 PM

Previous topic - Next topic

Tom Threetoes

Quote from: kytrkyhntr on January 03, 2020, 11:41:30 AM
Shoot hevi-13 number 6 3inch and start the deep fryer. I pretty much agree except I like the 3 1/2 better.

West Augusta

No trees were hurt in the sending of this message, however a large number of electrons were highly inconvenienced.


Kylongspur88

My 870 sm through a .665 puts up the same numbers with LB 3 1/2 #5s as it does with 3 1/2 hevi #6s. Honestly the pattern is to tight for close shots. If I'm hunting in hardwoods where shots are close I'll use the regular HV 4s.

Ihuntoldschool

If it was me I would keep rolling with the Winchester Double X #5 in 3.5 inch if that worked for you last year, especially knowing that POA and POI were on point with your bead sight. If it's not broke, I wouldn't worry about trying to fix it. That shell is a good killing shell anyway; it hits hard in my experience and seems to crumple birds up.  I don't get too caught up in the #'s game like most people do, I'm trying to kill Spring Gobblers not win a still shoot competition. There is a big difference between hunting shots and still target shooting. If that 70 was pretty even at 40 yards, I would definitely hunt and kill birds with that. I don't put much into bad batch or bad lot numbers, most of that is hype. You could try another box but I would bet money they will shoot like the box you already have.  Knowing that, it's definitely the shells not the gun being off. I saw the same thing with Longbeards frequently. In my gun they would pull about 7 or 8 inches to the right while every other lead shell was dead on with the bead. I prefer hunting with a bead sight for turkeys. Rifle sights are better for rifles, shotguns I want just a bead.


Ihuntoldschool

One other thing, if I was going to try Longbeards in your gun again, I would definitely go with a 3.5 inch shell of either #5 or #6. Sometimes 3 inch shells shoot to different POI than 3.5 inch shells.

lmbunch69

I killed my first bird, a jake, right around 40 yards last year with the double x. Any of you tried the Remington premiers? I've got a box of 3.5 #4s

Kylongspur88

Quote from: lmbunch69 on January 04, 2020, 05:16:39 PM
I killed my first bird, a jake, right around 40 yards last year with the double x. Any of you tried the Remington premiers? I've got a box of 3.5 #4s

I've never had any luck with Remington turkey loads but I'm sure some guns like them. Give them a try

Hersh


ShootingABN!

Check out www.nitrocompany.com and spend some time reading about patterning, then look up you model gun and what choke brand/ and size for what size shot.... Every shotgun can be different, however I've found the recommendations to be on the money. They also give you a pellet count of their shells in 10" circle @ 40 yards.

That website is a custom shell company. They have TSS, Heavy Shot and Nickel. Expensive but well worth it to me.

Yes I've killed turkeys since the 80's With Winchester and Federal shells at 35 yards.... Would only have 5 pellets in the kill zone.... Todays shells @ 40 yards have hundreds of pellets..

Finding the right killing combo for your gun is part of the fun..

Good luck.