OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

New choke = POI change?

Started by WNY Bowhunter, March 13, 2015, 07:44:37 PM

Previous topic - Next topic

WNY Bowhunter

Tried patterning my wife's 870 20 gauge today...

The new Truglo SSX ended up throwing the pattern high and to the right with both the Fed HW #7's and the Win. lead #5's at 20 yds. I moved the William's firesights to get the pattern centered but now the windage is pretty far over to the left and I really dont care for it like that...

Is this a common problem when switching chokes (never had this problem with my past shotguns)? I'll have to shot a few next time with the old HS choke to see what that does.
"I'm not from New Yawk.  I'm a REDNECK from Western New York!!!"
"It's not a passion. It's an OBSESSION."


SKFOOTER

Yes that happens quite often.  That's the advantage of having the adjustable Firesights.  I wouldn't worry about the rear sight being over to far to one side if it corrects the point of impact. 

allaboutshooting

Quote from: WNY Bowhunter on March 13, 2015, 07:44:37 PM
Tried patterning my wife's 870 20 gauge today...

The new Truglo SSX ended up throwing the pattern high and to the right with both the Fed HW #7's and the Win. lead #5's at 20 yds. I moved the William's firesights to get the pattern centered but now the windage is pretty far over to the left and I really dont care for it like that...

Is this a common problem when switching chokes (never had this problem with my past shotguns)? I'll have to shot a few next time with the old HS choke to see what that does.

It's actually pretty common for POI to change with different chokes. I'll always clean everything, bore included and reinstall a choke when that occurs and sometimes see different results.

If you have the torque different on the magazine cap, that will also affect where the shot hits. I'd recommend that after you clean everything, you hand tighten the cap, then use some padded pliers and turn it 2-3 more clicks. Mark the cap and the band, red nail polish works well, so that you can see exactly where everything is. Then see where your POI is and go from there.

Thanks,
Clark
"If he's out of range, it just means he has another day and so do you."


Ihuntoldschool

Pretty common. The tighter the choke, and the heavier the payload the more erratic things get as a general rule.

drenalinld

Very common but I am convinced it is choke imperfection.

WNY Bowhunter

Just picked up a Tightwad choke from Wally world...I'm curious to see how it's POI will be?
"I'm not from New Yawk.  I'm a REDNECK from Western New York!!!"
"It's not a passion. It's an OBSESSION."