OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Primos tight wad ?

Started by Hitman 23, April 11, 2014, 03:15:58 PM

Previous topic - Next topic

gophert

Quote from: FL-Boss on April 19, 2014, 06:45:43 PM
Intresting.. these tightwad choke have ports correct?  Won't that mess with the FC wad in the Fed HW loads?   I thought ports were a no no...   but it sounds like it's working..

The FCW in the 20 ga Federal HW is slightly softer and therefore is not diversely affected by ported chokes.  The wads in the 12 ga load on the other hand is hard and does not do well with ported chokes.  That is why you see so many good choke combo's with that load in the 20 ga section. 

Meatseeker

My 870 20 ga loves the Hevi- Magnum Blends with a Truglo SSX.  165 -170 in a 10" circle at 40 yrds.  But for some reason, the Fed HD #7's don't pattern that well out of the same chock.  I was thinking it must be the porting in the choke with the FC wads too.