OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Tru Lock Federal HW7s choke

Started by MDTOM84, March 05, 2020, 06:19:15 AM

Previous topic - Next topic

mightyjoeyoung

Quote from: corp on March 06, 2020, 10:05:37 AM
sorry my last post I typed it wrong it should have been .620- .060 = .560 or .560 + .060 = .620 . next time i'll read it before I post it
You're fine. I'm saying the website has the bore diameter at .640. THAT would make it 0.020 larger...
Big Al's "Take-em" Style Silhouette decoys Pro-Staff.

Of all the things I've lost, I miss my mind te most.



troutfisher13111

That's just an example they use to show you their system, it's not anything to do with the actual choke

Sent from my E6910 using Tapatalk


corp

Quote from: Terry on March 06, 2020, 01:22:45 PM
That's just an example they use to show you their system, it's not anything to do with the actual choke

Sent from my E6910 using Tapatalk


Bingo. The example is for a 12 GA .640 Dia. choke. The sku # below it is for a Rem. 20  GA .560 choke.

tnanh

Quote from: mightyjoeyoung on March 06, 2020, 01:02:07 PM
Quote from: Terry on March 06, 2020, 06:10:42 AM
Quote from: mightyjoeyoung on March 05, 2020, 01:22:14 PM
Quote from: tnanh on March 05, 2020, 11:59:03 AM
My Tru Lock heavyweight 7 is a .560. I measured it with digital calipers.

Well then that means either the website is wrong or your calipers are off, because .640 minus .060 is .580...
Where did you get that a 20 gauge inside diameter is .640???

Once again, you are reading it wrong but no big deal.
NOMINAL bore is around .615 and there are over bored 20 gauges,  though I got it from the OP's post since you're asking...

savduck

The old heavyweight choke and the new tss choke are both 560
Georgia Boy