OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Has anyone ever cut a benelli m2 barrel to 20 inches

Started by Alabama556, February 10, 2024, 12:09:27 PM

Previous topic - Next topic

Alabama556

Has anyone ever cut a benelli barrel down? I did not know if it was possible to cut it down and have enough meat left in the barrel to thread for chokes.

Borden811

If you're talking 12ga, I'd just look for one of the 21" field barrels and go that route. Thats what I did when I was shooting a 12ga.

Alabama556

It's a 20 gauge m2.

Sorry I should have clarified.


Sent from my iPhone using Tapatalk

sasquatch1

Yes, sumtoy cut and threaded mine


Sent from my iPhone using Tapatalk Pro

Alabama556

What length did you end up with? I know it has to be cut at a rib.


Sent from my iPhone using Tapatalk

sasquatch1

You can pick a spot depending on the rib post

This is where I marked it



Sent from my iPhone using Tapatalk Pro

sasquatch1


Alabama556

Thanks. I need to find a spare barrel and send to William.


Sent from my iPhone using Tapatalk

sasquatch1

You may can talk to hunt about it. Not sure if he can thread it with Benelli threads

Mine are Truchoke threads, so outside of one of his chokes the other choke options are limited. Not many Truchoke tubes out there


Sent from my iPhone using Tapatalk Pro

Alabama556

Sumtoy threaded my 14.5 inch benelli 12 gauge barrel and installed one of his chokes. It is threaded for tru chokes as you state. The difference is the 12 gauge barrel came from benelli's factory at 14.5 inches. It was a police gun so it has a straight cylinder.

I hope the cut down 20 gauge barrel has enough wall thickness to be threaded.




Sent from my iPhone using Tapatalk

Twodogs

I sent my 20 gauge M2 barrel to Briley's and they told me the barrel was too thin to cut and rethread with crio chokes. If I wanted it cut down I would have to use one of their thin wall chokes.

Roost 1

Steve Rose at Rose Action Sports is your guy.
Has done several for us.  Winchoke threads when finished.
Steve has cut and rethreaded over 1300 barrels.

Alabama556

Steve has done work for me in the past. Thanks for reminding me of him


Sent from my iPhone using Tapatalk

Ridge Rooster

Huntin Buddy of mine just got his SBE2 barrel back from Rose and it is perfect but was to thin for any choke system but Tru-Thread.

Ridge Rooster
Old School 11-87 + Nitros = Dead Ridge Roosters