I'm turning my Mossberg 500 into a turkey gun. I got a Carlson longbeard choke and some Williams open sights that go on the rail. Next days off I'm going to take a couple of different loads and pattern them. Any recommendations for shells that've worked well for people with that combo of gun and choke? I've read good things about the Winchester Longbeard XR, what are the pluses and minuses of the #4,5 or 6 shells?
On another note I am wondering if I should buy another choke, like a Rhino or Indian creek and compare the two? Is it worth spending the money to do that or do I just see if I find a shell that patterns really well with the Carlson and call it good?
Thanks!
Sent from my iPhone using Tapatalk
I have a Mossberg 500 12ga. With the Carlsons LBXR choke and Win. LBXR 3in. 1 7/8 #6 shell it shoots a really great pattern. I also tried the faster (1200 velocity ) 1 3/4 oz shells and #5s but the 1 7/8 1050 velocity #6 shot the best.
Before buying another choke pattern the long beards.
That sounds like a plan. Get the LBXR's in 5 & 6 and see how that does. Just for comparison sake what would be an alternative you recommend?
Sent from my iPhone using Tapatalk
Can you put the Remington Nitro through that choke? It's lead but it's harder and has some coating on it?
What about the federal 3rd degree? Looks like that has some tungsten in it...
Sent from my iPhone using Tapatalk
Yes, you could shoot those rounds thru that choke, you could also shoot TSS.
I also have 10 & 20ga turkey guns that I shoot hevi and tss in and to be perfectly honest the biggest bang for my dollar has been the Carlsons Longbeard Xr choke and the Longbeard xr #6.
I think I paid less than $50 for the choke tube and a box of shells on sale. I've spent 10 times + that on barrels, choke tubes, and ammo for my other guns. Unless you spend big money and shoot TSS, long beard xr is the only lead load I would use. :z-twocents:
I had great luck with an hs strut untertaker hd choke and longbeard #6s. I hunted it but it was a little too tight for my liking. I'll agree that the 1 7/8 load shot better for me as well.
:morning:
I know yer on the right load/choke combo for that gun..! :camohat:
PS-make sure and keep the choke clean.
Just got the William's Fire Sight's on there. What a pain in the balls with the tiny screws! Looks good now though.
(https://uploads.tapatalk-cdn.com/20200217/5a4fbb68f509ff3e87831475513f2f09.jpg)
Sent from my iPhone using Tapatalk
These showed up too. Gonna do some patterning/zero the gun in the next day or two. I'll put up some results.
(https://uploads.tapatalk-cdn.com/20200217/9e0a9d274894768bb131d33688b88f20.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20200221/4fa4f6bed38413399746e0dc270cadcb.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20200221/94eaa34b558de76f0a12ee313785c9a8.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20200221/cd7f745872e89c1a8f481d939f0f463a.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20200221/e0430ed67ce7267d1df5bb04a1740b35.jpg)
Sent from my iPhone using Tapatalk
All those were at 40 yards. #5 and #6 had the same percentage on the paper (I know that's not exactly how you're supposed to do it but paper was 24"x30" so close enough). I just think the #6's had a more consistent pattern and with the splattering targets put more in the kill zone. The Williams Fire Sights are pretty dope. They were pretty close to zero right out of the box. I think I'd kill a turkey either way but I'm gonna go with the 6's.
Sent from my iPhone using Tapatalk
Where did you pick up the firesights at? Looking for a decent sight to replace the bead on my 500.
I originally ordered off of Amazon but I got the wrong part. Ended up with the replacement front sight and dovetail for Mossy 500 slug barrel. Called them and ordered the right part directly from Williams. Wish I still had the number, just make sure it is for the vent rib not the slug barrel. Getting them on was a total pain in the balls. Tiny a@# screws and hard to thread but I got my wife to help me. She doesn't have big hairy ape hands ;D
BUMP....I'm curious if that is good or what?! Never patterned a shotgun before. Thanks
Sent from my iPhone using Tapatalk
I use the #6 shot too in my Mossberg 835. And I also use the 6s in 2 3/4 inch in my Remington 1100 12 gauge. Really like the Longbeard XR for the $$.