Text only | Text with Images

Turkey hunting forum for turkey hunting tips

Turkey Calls => Call Making => Topic started by: Dtrkyman on April 30, 2016, 01:33:06 PM

Title: Glass soundboard prep?
Post by: Dtrkyman on April 30, 2016, 01:33:06 PM
Getting ready to put a pot together, copper surface with a glass soundboard, should I leave the glass slick or scuff it?

Thanks
Title: Re: Glass soundboard prep?
Post by: mmclain on April 30, 2016, 02:59:27 PM
It's fine do not use an adhesive that sets hard.   Silicon most any other soft set adhesive. 
Title: Re: Glass soundboard prep?
Post by: Dtrkyman on April 30, 2016, 03:49:15 PM
goop is what I used.  Hopefully this sounds ok, I had a pot from a glass call that the surface cracked so i took it apart and got a new sound board and copper striking surface, I believe the pot is hickory but do not remember?
Title: Re: Glass soundboard prep?
Post by: mspaci on May 03, 2016, 09:01:13 AM
I acetone wipe all surfaces before gluing. Mike
Title: Re: Glass soundboard prep?
Post by: 3rdDay on May 04, 2016, 05:14:20 PM
I use goop or M3000
Text only | Text with Images