I have a part broken on a CD 20 auto. Its the part that is in the center of the bolt..the shiny sliver pc that has a little ear under the pin. Its broken on the under side and will not eject or let the bold open any. You can pull back slightly and take a knife and press the part down from the top and it will open. It will still shoot, but I need this part replaced if possible.
What's it called first?
I'm going to try and call tomorrow for a part, but with CD just coming back, I'm scared that the older guns may be left out. I've have it welded lightly and it broke the first shot. Apparently that little ear on the under side take some abuse and pressure
Check out this link...... http://www.gunpartscorp.com/
I get a lot of my factory parts from here. Decent prices and reasonable shipping times. Look up your gun model and it should have a diagram of your gun broken down with part #'s listed.
Maybe if you had a picture of the part I or someone else might be able to help you identify it.
I'm gonna say its the locking block. Only trouble is that the dang guns were made all over the continent and its going to be hard to tell what generation it is or where it came from
Quote from: BigStrutter on April 15, 2014, 07:21:36 PM
Check out this link...... http://www.gunpartscorp.com/
I get a lot of my factory parts from here. Decent prices and reasonable shipping times. Look up your gun model and it should have a diagram of your gun broken down with part #'s listed.
Maybe if you had a picture of the part I or someone else might be able to help you identify it.
Yep. My go to site for anything firearm related.