a friend of mine has a Benelli Nova 20ga full camo in really good condition with the exception of a bulge in the end of the barrel. it is a 26" barrel and I'm thinking it can be cut down a couple inches and re-threaded. now for the question...any idea who can thread it to accept the original Benelli Mobil threads? he has offered to sell it to me on the cheap but before I jump in I want to know all the particulars.
thanks in advance
try William at Sumtoy, he can tell you if it can be done.
Quote from: 3bailey3 on December 28, 2022, 04:51:43 PM
try William at Sumtoy, he can tell you if it can be done.
Williams the man on this one
Just remember a new one cost around 400 dollars and if you search on the forum, they don't make the best turkey guns. So the cost of shipping and having someone cut the barrel and re-choke the gun can run around 150 - 200 dollars so you have to ask yourself, do i just save my money and buy another gun.. It's all up to you and what you want to accomplish with the gun after you have it repaired. IMO... I would look for a better gun in either new or used without the barrel problems. Shipping this day and time is terrible also.. IMO ... I would buy Mossberg SA 20 ga. new or used over that Benelli .....IMO
yeah Greg. I'm very aware of what you're saying. I do not need another turkey gun but this one can be had very cheap is why I'm pondering on it. the polk stock I've been working on will probably be my go to gun because the 870's are getting a bit too heavy for me anymore.
thanks everyone for your replies.
If it can be had super, super cheap I'd buy it, saw it down myself, and use it as a couch gun. You could keep an eye out for a barrel. There's one on eBay right now, but it's a fuzz high. Anyhow, keep an eye out and just buy a new barrel when you see one come up affordably.
Here's the barrel on eBay if you're interested. Depending on what you got the gun for you might still come out cheaper than most used Novas. https://www.ebay.com/itm/333098895159?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lLTLQEtiTZu&sssrc=2349624&ssuid=wc6kpstVTVm&var=&widget_ver=artemis&media=COPY
Sent from my iPhone using Tapatalk
Not wanting to distract from the specific question at hand, but I am curious about the bulge, it's possible causes, and the inherent danger it might present if it was continued to be fired as is? Not being a gunsmith or expert in these matters, I just wonder how big a deal this sort of thing really is in modern shotguns. Is there a real danger in the barrel exploding in situations like this,...or is it that nobody really want to find out by continuing to shoot one? I have always heard about the dangers of shooting older shotguns with barrel distortions like this, but this is a subject I have not heard much about in recent years.
...Any thoughts from our resident experts?...
Quote from: GobbleNut on December 29, 2022, 09:02:21 AM
Not wanting to distract from the specific question at hand, but I am curious about the bulge, it's possible causes, and the inherent danger it might present if it was continued to be fired as is? Not being a gunsmith or expert in these matters, I just wonder how big a deal this sort of thing really is in modern shotguns. Is there a real danger in the barrel exploding in situations like this,...or is it that nobody really want to find out by continuing to shoot one? I have always heard about the dangers of shooting older shotguns with barrel distortions like this, but this is a subject I have not heard much about in recent years.
...Any thoughts from our resident experts?...
This was my thought as well, just how far down the barrel might the damage go that it can't be seen in micro fractures in the barrel or something. I would not buy it myself, I have enough problems with my body.
thanks again gang. I'm working on getting a picture or two.
here it is. no idea how it happened.
Quote from: sswv on December 29, 2022, 12:30:30 PM
here it is. no idea how it happened.
Just from the picture, the gun looks well used.. not anything i would invest more money or buy myself... good luck with your decision ...
Quote from: Greg Massey on December 29, 2022, 12:50:13 PM
Quote from: sswv on December 29, 2022, 12:30:30 PM
here it is. no idea how it happened.
Just from the picture, the gun looks well used.. not anything i would invest more money or buy myself... good luck with your decision ...
Agreed Greg, looks banged up from the looks of the gouges in the vent rib that's shown...
More trouble them what it's worth, I would pass on that and look for something in better condition.
thanks again gang. I'm not in the market for another shotgun this one just happened along. if it can be had cheap enough I'll grab it and cut the barrel a couple inches and go from there. if not, I will encourage the owner to do the same. it's useless like it is but could be a good field gun for someone like a rabbit or bird hunter. oh yeah' the end of the rib is the worse part of the gun, the rest looks just fine.
Quote from: sswv on December 29, 2022, 03:45:51 PM
thanks again gang. I'm not in the market for another shotgun this one just happened along. if it can be had cheap enough I'll grab it and cut the barrel a couple inches and go from there. if not, I will encourage the owner to do the same. it's useless like it is but could be a good field gun for someone like a rabbit or bird hunter. oh yeah' the end of the rib is the worse part of the gun, the rest looks just fine.
Good luck either way my friend.....
I had a benelli nova in the 12 gauge once. I could not get rid of it fast enough as in my opinion it was a piece of junk
My dedicated turkey gun is a Nova...never had a problem with it.
Quote from: backwater on December 29, 2022, 08:08:08 PM
My dedicated turkey gun is a Nova...never had a problem with it.
I hunted a Benelli SuperNova for a long time. Only difference between the two is the stock. It was a good gun. Shot great patterns. I will say toward the end I ran into the spring issue often associated with Benellis (light strikes, dreaded "Benelli click"). Replaced that spring and it was fine. My only gripe with that gun was the heft of the foreend, and that's just personal preference. I don't like a big foreend on a gun. Like I said, they're good guns. Certainly not junk as some folks are suggesting.
Sent from my iPhone using Tapatalk
Id toss it an get a $199 savage 301 20 gauge. Not worth fixing IMO
Big thing is how much can you get it for. You will have money in it and chokes because it will probably be to thin to thread back factory. So gun plus 130 to 150 all in who does it.
thanks for the replies and opinions everyone. I did pass on the Benelli however, I left him with a standing offer of $125. I figured for that price cut down on both ends it would have a purpose around the house or in the pick-up.