Turkey hunting forum for turkey hunting tips

Turkey Calls => Pot Calls Forum => Topic started by: 357MAGNOLE on January 30, 2016, 08:34:42 PM

Title: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 30, 2016, 08:34:42 PM
What should the well prepared hunter take with them in the woods in regards to pot calls? I have heard many people say to have a couple or more calls, and a couple strikers per call so multiple sounds can be produced.

So how many Pot calls do you take with you?

I already have a Halloran Crystal Mistress, about to be paired up with one of Del Cro's Jatoba strikers when it gets here.

Should I add a slate, aluminum, another style?

Title: Re: Question about Pot calls in your vest.
Post by: greentag on January 30, 2016, 08:43:32 PM
i will sometime take three if im wearing a vest but most of the time just two with several strikers matched up to them,there will always be a slate,then the others vary depending on what ever mood im in when i get my stuff ready.then if im hunting the same place for a few days in a row,i will rotate my calls with others,i dont know if it helps but thats just what i have always done.
Title: Re: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 30, 2016, 08:48:19 PM
Ill also add in.... How does one know which striker/pot combo to run on that day?
Title: Re: Question about Pot calls in your vest.
Post by: greentag on January 30, 2016, 09:06:19 PM
i would run what ever you are most comfortable with and can run the best,alot of times early in the morning a slate call will draw moisture and not be able to play as good,but crystal and other surfaces do better. also its best to call soft first in case one is close to you,thats when a good slate or glass call comes in handy.you can always get louder if needed but say ones twenty yards from you and you cant see it you dont want to be screaming at it with something loud.then if you havent had one respond you can louder,an aluminum or crystal is good for reaching out there,like if your calling trying to strike one,cause they generally are louder,they also come in handy for windy days when it is harder for a bird to hear you or in hilly terrain when all the leaves are on the trees.as far as sitting down and calling one to the gun,i personally think a slate is hard to beat,you can call low and soft or get loud if needed.also several different surfaces come in handy because you never know what sound he wants to hear and this can change from day to day.you may not be having luck with one call and switch and that be all it takes for him to respond.i always say its like fishing,you wouldnt want to go bass fishing with just one bait,you switch it up untill you find something they like,turkey hunting is very similiar in my opinion.
Title: Re: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 30, 2016, 09:26:46 PM
Greentag,

Great information. I appreciate it.  I am sitting here pondering on whether I should add a slate or aluminum call to my vest. I have never owned one of those types, just one in crystal and one in copper (which I gave away because It was a pain to keep clean and annoyed me)

Sounds like slate would add more versatility to my vest, but the Aluminum is very intriguing since it requires little to no maintenance.
Title: Question about Pot calls in your vest.
Post by: Planner on January 30, 2016, 09:46:59 PM
Based on what you've provided I would add a slate call before adding an aluminum. Not that aluminum is bad, but a slate is a very easy call to run and if I'm only carrying two calls into the woods it's going to be a crystal and slate. Luckily, I'm more than willing and able to carry the whole orchestra.... But more often than not it's the crystal or a slate that comes out first on nearly every hunt.


Sent from my iPhone using Tapatalk
Title: Re: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 30, 2016, 09:52:13 PM
I don't have a problem carrying more than two, but if I had 2 calls that complimented each other that is what I would prefer for sure. I don't know where to begin with the slate, ill probably just go back to Halloran and get one of his. I love the Crystal Mistress, so I cant imagine anything wrong with his other calls. Ill have to figure out some good striker options to throw in the vest as well.
Title: Re: Question about Pot calls in your vest.
Post by: MK M GOBL on January 30, 2016, 10:17:52 PM
I only carry 2 pot calls in my pack, first and foremost is my Cody World Class Slate call. I have ended more turkeys with that call over the last 20 years than anything else and it's still doing the job! My other call is a MAD Heavy Metal glass call that I picked up for $10 and that call is the other end of the spectrum and when called on it will steal a show! I do carry a few strikers along but run them on both pots. I don't pick pretty I pick performance.

MK M GOBL
Title: Re: Question about Pot calls in your vest.
Post by: Jgarrett on January 30, 2016, 10:34:57 PM
Get you a great sounding 2 sided call, that will allow you to soft talk and still get loud (pure death by Supreme, Ed Jenkins, Brad Roberts....just to name a few, make great 2 siders).....then pick another call you love....I personally like a good aluminum, but I recently was able to obtain a Talking Dirty so now that's all I nee......oh wait I'm letting the secret out????  Good luck to you this season and have fun with it!????
Title: Re: Question about Pot calls in your vest.
Post by: greentag on January 30, 2016, 10:42:44 PM
like planner said,i would  also add the slate before the aluminum.dont worry about how hard they are to maintain,they are really the easiest of all to take care of,you get any thing on them or if you need to condition them all you need is a piece of scotchbrite and rub it side to side and they are ready again.on damp mornings they do draw moisture but get back to normal quick.ill take them on damp days,ill usually put them in a ziplock back and keep it in my vest,then it is ready even if it is foggy and damp.to me and many others a slate is the easiest and most forgiving call to run.if you can run that crystal than you will definatly be able to run the slate and probably better.the slate that halloran makes is a good one,you cant go wrong there.as far as strikers massacar ebony,purpleheart,dymondwood and many more sound good on them.anybody just starting to learn on a pot call i feel would be better off with a slate first,the other surfaces can sometimes be finicky if you dont have them conditioned good,they can make unwanted sounds for someone not use to them,were as a slate is easier to run,easier to care for,and alot more forgiving to play.i would buy that halloran,a few strikers,take your crystal and practice,you would definantly be ready to go with those.
Title: Re: Question about Pot calls in your vest.
Post by: Double B on January 30, 2016, 11:00:13 PM
Last few seasons I carry 4-5, a slate,  ceramic,  aluminum and 2 glass calls are what I ended last season with.     I run a playoff system in the man cave from late January til April and choose  between the best of the best (ever changing, right?)  to get in the vest by April.  Your tryout selections will be growing if you're anything like me!    And strikers. ....usually 7 most mornings.  Purple heart, hickory,  rosewood and black locust are good choices for me and are carried.  Then a water proof tipped corncob striker and a laminate/dymondwood.   Two siders mentioned before is excellent advise....2 for one!    Good info already given but will add that I recommend you don't carry so many strikers that they ever ride 2 per pocket and cause noise.  Fill your vest but don't stuff it.  And have fun deciding! 
Title: Re: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 30, 2016, 11:12:59 PM
Man you guys are awesome. I'll have to get that Halloran slate and pick up a couple of his once piece strikers. Thinking Purple Heart for one, not sure on the other.
Title: Re: Question about Pot calls in your vest.
Post by: greentag on January 30, 2016, 11:33:34 PM
if you order that call from david you can tell him to match a couple more strikers up to it,strikers are what makes a good pot call excellent.you can't just buy a striker and expect it to sound good on a certain pot,it may be awesome on one call and sound awful on the next,thats why alot of us have so many strikers,then you can go through and match them to what pots they sound best on.you can tell david to go ahead and match some up to it for different sounds and be a step ahead right out of the get go.dont overlook the cheaper two piece strikers he makes either they are very good.be warned though if you get to playing with pot calls and like them they can become addictive,strikers to ;D good luck,
Title: Re: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 30, 2016, 11:48:28 PM
Thanks.  I went ahead and ordered that slate call from him.  I didn't really have any extra cash to throw down so the wife might be after me when she finds out    :fud: :OGani:

I sent him a nice email requesting he match up a couple good strikers. I also ordered the one piece purple heart, but I want to try that out on my crystal mistress too.

Title: Re: Question about Pot calls in your vest.
Post by: Bowguy on January 31, 2016, 12:39:30 AM
I see you already ordered the call but I personally would always carry an aluminum. A good aluminum is no maintenance as long as you keep it clean. They play extremely easily and are definitely another sound in your vest. Good aluminum calls can also be toned down easily. They're often the only call I use, even when the bird is roosted since you can tone em down so easily.
Prob one of the easiest to run, maintain and run loud or soft with zero problems is Schafers Atomic 13. That's not saying many others aren't great, just that his surface is suitable for all and that call is brutal on birds
Title: Re: Question about Pot calls in your vest.
Post by: 357MAGNOLE on January 31, 2016, 12:47:14 AM
Quote from: Bowguy on January 31, 2016, 12:39:30 AM
I see you already ordered the call but I personally would always carry an aluminum. A good aluminum is no maintenance as long as you keep it clean. They play extremely easily and are definitely another sound in your vest. Good aluminum calls can also be toned down easily. They're often the only call I use, even when the bird is roosted since you can tone em down so easily.
Prob one of the easiest to run, maintain and run loud or soft with zero problems is Schafers Atomic 13. That's not saying many others aren't great, just that his surface is suitable for all and that call is brutal on birds

I have already looked into it. I did not want to throw too much into another pot call as I am also looking to pick up a few more strikers and possibly a trumpet to try something different.  I am pretty much geared up for the spring, but also exhausting my turkey funds quickly.  I will add an aluminum call to my arsenal before the spring is up, or by summer time. But I am done for now on purchasing pot calls. I am still interested in hearing others inputs on what they carry in their vest as far as variety of pot calls, and when they like to use which types.
Title: Re: Question about Pot calls in your vest.
Post by: Bowguy on January 31, 2016, 01:59:50 AM
No prob good luck bud, not a trumpet but another type suction yelper is a cane call n they're half the price if money is tight. Mark Sharpe makes a great one. If you want a dif sound n money is real tight you can get a scratch box or two. Very addicting calls but maybe $20 bucks or a little more if you want the fancier versions. Call SS custom calls for those.
Title: Re: Question about Pot calls in your vest.
Post by: stone road turkey calls on January 31, 2016, 07:38:14 AM
Quote from: MK M GOBL on January 30, 2016, 10:17:52 PM
I only carry 2 pot calls in my pack, first and foremost is my Cody World Class Slate call. I have ended more turkeys with that call over the last 20 years than anything else and it's still doing the job! My other call is a MAD Heavy Metal glass call that I picked up for $10 and that call is the other end of the spectrum and when called on it will steal a show! I do carry a few strikers along but run them on both pots. I don't pick pretty I pick performance.

MK M GOBL
             
'' I don't pick pretty I pick performance '' :icon_thumright:. well said
Title: Question about Pot calls in your vest.
Post by: mote1977 on January 31, 2016, 02:13:43 PM

Quote from: Bowguy on January 31, 2016, 12:39:30 AM
I see you already ordered the call but I personally would always carry an aluminum. A good aluminum is no maintenance as long as you keep it clean. They play extremely easily and are definitely another sound in your vest. Good aluminum calls can also be toned down easily. They're often the only call I use, even when the bird is roosted since you can tone em down so easily.
Prob one of the easiest to run, maintain and run loud or soft with zero problems is Schafers Atomic 13. That's not saying many others aren't great, just that his surface is suitable for all and that call is brutal on birds
Took the words right out of my mouth. If I could only leave the house with one call it would be my Atomic 13.
Title: Question about Pot calls in your vest.
Post by: jwright8 on January 31, 2016, 06:16:08 PM
A slate and a glass. And several strikers.

Sent from my VS986 using Tapatalk

Title: Re: Question about Pot calls in your vest.
Post by: Happy on January 31, 2016, 07:50:58 PM
I carry a slate, glass, crystal, aluminum and copper. Take about 4 strikers and 8 or 9 diaphram calls. I figure that if I can't get one to respond with any of those combos that I least I won't get bored. At heart I really like my crystal and glass calls as far as pot calls go.
Title: Re: Question about Pot calls in your vest.
Post by: Spitten and drummen on January 31, 2016, 09:34:54 PM
I agree. Out of my aluminum calls ,  that's the only one that doesn't leave my vest. Also jimmys ceramic flat out gets it done. I have a lonzo black acrylic aluminum on the way. If it's anything like I have heard from others and sound files , it may take the 13's place. Man I love pot calls.
Title: Re: Question about Pot calls in your vest.
Post by: greentag on January 31, 2016, 11:13:45 PM
i love the atomic13 too,so much so i now have two the old 9 hole style and the newer one with the middle hole plugged.the old one is awesome my newer one to me doesnt sound as good as it.after the original poster gets his newest call in i think he may get addicted to them like the rest of us,when that happens i would suggest the atomic13 for sure,i just think that for someone new to them and learning a good slate call is hard to beat.
Title: Re: Question about Pot calls in your vest.
Post by: M,Yingling on February 01, 2016, 08:55:48 AM


I am still interested in hearing others inputs on what they carry in their vest as far as variety of pot calls, and when they like to use which types.
[/quote]


me I like carry 3 strikers fiber rod black locust dymond wood ,,,, as for pot man I carry them all lol   slate , crystal, glass ,aluminum , copper ,,titanium, ceramic ,,, and brass that's new one but have high hopes for it this season ,,,, out all them last year the birds seemed to like the copper titanium and crystal the most ,,, between them pots and good box call and 6 shells,,, box snuff  iam good to go 
Title: Question about Pot calls in your vest.
Post by: okiegobblers on February 01, 2016, 09:17:06 AM
I have 3 pots I usually carry. A Kimmey Hanks slate, David Halloran Crystal Mistress and a Mike Yingling Copper.

Sent from my SM-G920T using Tapatalk

Title: Re: Question about Pot calls in your vest.
Post by: slwayne on February 01, 2016, 11:53:29 AM
Crystal Mistress is always in my vest.  I usually will also carry a slate if rain/excess humidity isn't an issue.  I really like a slate for that real soft tree talk in the morning.  As much as I love my Crystal Mistress I have found that a slate just works better for me early in the morning.  If rain/excess humidity might be an issue I'll replace the slate with an aluminum call in a corian pot.  That thing will run under running water if need be.  Always have 4 - 6 different strikers depending upon the mix of surfaces I have with me on a particular day.  If it's gonna be wet then one of the strikers will be a carbon tip.
Title: Re: Question about Pot calls in your vest.
Post by: JLH on February 01, 2016, 05:53:20 PM
For me...my go to call is a 3.25" Sinclair brass in a cocobolo pot..that call will make any sound I need, as loud or as soft as I need, and depending on the striker, it will get raspy as heck, or clean and clear....truly an amazing instrument!
Along with that I carry a Sinclair 3" copper in a macasser ebony pot and a 3.25" titanium in a cocobolo pot .... along with a good mix of strikers, wich includes yellowheart, katalox, cocobolo, ebony, dymondwood and a few others..

Although, this year it may change.....I have a 3" Gabon ebony brass on the way, and one other call that is going to be something really, really special!

Title: Re: Question about Pot calls in your vest.
Post by: The Woodsman on February 01, 2016, 06:17:07 PM
1 and no
Title: Re: Question about Pot calls in your vest.
Post by: cutt down on February 01, 2016, 10:23:29 PM
I have more pot calls than I could play in a season if I played a different every day. Around here I have the most luck with a Paul Platz slate & a Mike Yingling copper. Those 2 stay in my vest. Throw in a handful of strikers & I can hit different tones with each call. I've gotten pretty partial to Larry Gresser strikers as well as Bill Lyman's. Got a new Brad Roberts glass call I'm going to run this season too! I try to carry a slate, glass, and a copper!
Title: Re: Question about Pot calls in your vest.
Post by: sixbird on February 01, 2016, 11:29:50 PM
I'm thinking I should go to a turkeys anonymous and confess my sins. I carry slate, aluminum, copper, crystal and a number of strikers that make each one sound good (to my ear). Also carry boxes and diaphrams. A gobble tube (shaker) and a dried turkey wing (for scratching and flapping). I can't tell you how many calls I have at home (It's embarrassing).
That said, a Lonzo's aluminum in a osage pot is one I wouldn't leave home without. It sounds great with a birch/oak (I think) flare tip Woodhaven striker. I'd guess that there are other hard strikers that would do as well.
My advice would be what you have, plus a quality aluminum. Sometimes they just want that tone.
I guess the best advice would be to concentrate on getting good with what you have. Listen to a lot of real turkeys calling (plenty of that on YouTube). Mimic them. No call is magic and I've seen them come to some pretty pathetic calling but to be consistent you should be proficient more than anything. Get something that sounds good and practice against real turkey sounds.
It's good to have different calls since some days they just respond to different sounds. You'll likely find that one particular call, in your hands will bring in the majority of birds that come. That may change year to year but generally there's one, that one that there's something about, that they like...
Good luck and most of all, have fun!
Title: Re: Question about Pot calls in your vest.
Post by: tomstopper on February 02, 2016, 05:27:25 AM
Mike Yingling copper (absolutely love this call on wet days)
Lights Out: Ceramic, Slate, and Glass.
These calls are great sounding when coupled with a large variety of strikers. How or which ones get played, all depends on how I feel the birds are liking or how the weather is behaving. I will say that if I had to pick only two, it would be my slate and then my glass (dry days) or my ceramic and copper (wet/damp mornings).
Title: Re: Question about Pot calls in your vest.
Post by: Spitten and drummen on February 03, 2016, 07:56:01 PM
Like most on here I am addicted to turkey calls like a crackhead to crack. I always say every year I'm not getting any new ones. It worked so well that I got another trumpet , 2 hen box's and 7 pot calls. Still looking at a couple of more pots. Oh yeah , and 7 more custom 1 piece strikers. Lord almighty I need help. Thank goodness I use the funds off other calls I thin to cover the expense mostly.