what is the common depth between the inside bottom of the pot and soundboard and the depth between the soundboard and surface?
if just getting in to call making I would suggest taking the time and go to 2 these 2 sites a do some reading theirs tons of info out their on call making when I decided start pots think I read every day for few weeks before even started ,, can start out from their and tweak the measurements to get the sound u are looking for and just remember every thing matters in measurements adjust this one then may have to adjust another lol bottom thickness side thick ness and woods softer wood put out different sound them harder woods ,, good ones start with cherry walnut cedar hard maple
good luck have fun at first youll make lots fire wood lol
http://thogamecallsforums.com/index.php
http://www.customcalls.com/cgi-bin/yabb2/YaBB.pl?num=1287169554
Like Mike said do your research and you will find answers to your questions. There are many variables to the way a call sounds. And my measurements maybe slightly different than yours. But a general answer is your sound board is usually about two sound boards thickness under the surface. And a good starting point on bottom depth is a 1/8" pedestal. Many other things will change the sound. So just experiment. I made alot of scrap before my first good call. Good Sharp chisels is also a must. And I'll second cherry wood. I love cherry sound and it's ease to work with. But I suggest spending hours and hours and here reading old threads and THO. I'm no expert at all but passing on what I know. These guys have helped me along the way several times.
Sent from my SM-N920V using Tapatalk
Thanks guys. I'm not getting into it (don't have the time or talent) but a buddy is so I'll pass this info along
Sent from my iPhone using Tapatalk