oops, cracked bone

[blackmagic]

Im in the middle of making my first set of wingbone calls.  I was fitting the ulna into the humerus and made a hairline crack about an inch or so long.  Is there any way to fix this or should I cut it down? thanks

[mastevt]

I had a diamondwood pot develop a crack while I was working on it.  I applied several coats of super glue to the crack over a couple of days, and lightly clamped it while it dried each time.  I'd try this on your wingbone, and use a small spring clamp on it while it dries.   It can be sanded smooth when done.