OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Getting started with mouth calls

Started by Uchee creek gobblers, December 31, 2013, 07:05:03 PM

Previous topic - Next topic

Uchee creek gobblers

Okay I'm wanting to start building mouth calls and have done it before. I've been calling in contest and hunting since I could walk and it's something I've always wanted to do. What do I need to get started. I'm gonna get a feather ridge press but don't know which to get. Any advice is greatly appreciated.
ALABAMA NOGGIN' KNOCKER

TRKYHTR

If you have a press you have all you need besides materials. I get my latex and frames from pioneerturkeycalls.com. The only thing you will have to do is cut your tape by hand. You can make a template and follow it to cutt your tape or you can get a tape cutter from Thad. Good luck and you will find that your turkey calling will get much better after you start making your own calls.

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Uchee creek gobblers

Okay buddy! Thanks and I hope to be making calls in about a week or so.
ALABAMA NOGGIN' KNOCKER

Uchee creek gobblers

As far as reed tension what would be a good starting number? And reed thickness what does play as far as tone and pitch?
ALABAMA NOGGIN' KNOCKER

TRKYHTR

You usually want a thicker reed on top. Thats why you see alot of calls with yellow, green, or grey .004 on the top reed. Then thinner reeds underneath like .003 clear or prof. Depends on how you call if your a huffer or a blower as far as tension goes. Try somewhere around .150 and go from there either more or less. Good luck,

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Uchee creek gobblers

 Thanks man that helps me a lot! My press is ordered and I'm bout to order some materials to get started. Is their a certain kind of scissors that you use for making the cuts in the read?
ALABAMA NOGGIN' KNOCKER

TRKYHTR

I use some real sharp sowing scissors. I got them at hobby lobby. They were about 20.00. They are small because you are working in a small area.

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Uchee creek gobblers

When you stack the latex do you jus use a punch to hold it together before you put it in the frame?
ALABAMA NOGGIN' KNOCKER

TRKYHTR

Actually I use a corn cob holder. It pricks twice with each attempt.

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Gooserbat

Quote from: TRKYHTR on January 13, 2014, 12:54:19 AM
Actually I use a corn cob holder. It pricks twice with each attempt.

TRKYHTR

:corn:  Now that's an Idea.
NWTF Booth 1623
One of my personal current interests is nest predators and how a majority of hunters, where legal bait to the extent of chumming coons.  However once they get the predators concentrated they don't control them.

strut-n-rut

Quote from: TRKYHTR on January 13, 2014, 12:54:19 AM
Actually I use a corn cob holder. It pricks twice with each attempt.

TRKYHTR
great idea

Otdrzman

Quote from: Uchee creek gobblers on January 03, 2014, 09:47:54 PM
Thanks man that helps me a lot! My press is ordered and I'm bout to order some materials to get started. Is their a certain kind of scissors that you use for making the cuts in the read?

Did you get your press and supplies? How are the calls coming?

Uchee creek gobblers

Yes I got everything in and actually made my first one last night! I'm having a problem cutting the reeds and I may be trying to go to fast. I'm trying to make a combo cut and I can't get it without it being jagged looking.
ALABAMA NOGGIN' KNOCKER

turkeykiller22

It takes practice! You will get it before long! Check out this video, it may help some!

http://www.youtube.com/watch?v=wyEeQZRWbTA

-Drew
Grounded Brand - https://groundedbrand.com/

TRKYHTR

I did a little video the other day. It might help. If you have any questions just ask.

Joe

http://www.youtube.com/watch?v=krkLDF073_k
RIP Marvin Robbins


[img]http://i261.photobuck