OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

CA ?

Started by TRKYHTR, February 18, 2011, 07:42:19 PM

Previous topic - Next topic

TRKYHTR

I had to use some CA glue on a pot the other day and when I went to finish the call the CA glue had a reaction to the lacquer finish and turned white. It didn't do it everywhere just a few spots. Anybody ever have this happen? If so what can I do to avoid it in the past and how can I correct it on this pot? Thanks guys.

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

dreis3

Hey Joe. I'm no expert by any stretch of the imagination but maybe try using just the ca glue as a finish and then polishing it. I use hut plastic polish to polish up the ca. Not really sure if this helps solve your dilemma or not, but might be worth a shot.

-Derick
D. Reis Custom Calls
www.dreiscustomcalls.com

Bonjour

That is kind of odd Joe. I have never had that happen before so I'm not sure what could have happened, but was the glue possibly still wet when the finish was put on? That is the only way I could see it reacting.
      Ryan

M,Yingling

Id say glue still wet . I did some hole filling used CA ,, and it was kind cold in my shop and it toke good while for glue to set up , had to put the piece in front of heater for it to set up.
Not taking orders for calls at this time ,,,but my have some on hand  ,,,I Dont sell strikers
I do like copper pot calls,,,,Get them While u can
My YouTube
https://www.youtube.com/user/CallerTurkey

TRKYHTR

I didn't think it was still wet. I had my hands all over it before I finished it but I did have to use alot to fill some holes. Maybe it was still a little wet. I'll have to make sure from now on that its completely dry. Thanks guys.

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Wolfpack

Ca glue is slightly acidic and sets up by going slightly alcaline, generally
by reacting with the humidity in the air. I use an accelerator to cure
it as most woods are acidic and can significantly increase the cure time.
Could be the glue you used. I buy mine in 16 oz bottles from Starbond and
keep it in the fridg. to extend its shelf life.

Dewey